PDF Drawing Measure

Opens a PDF drawing in your browser and lets you measure the distance between two points, a polyline’s length, a polygon’s area and perimeter, and angles by clicking. Set the scale by calibrating with a line of known length or by entering a scale of 1:N (a PDF’s Measure dictionary is used as the starting value when it has one). Results are shown in mm, cm, m, inches or feet, and can be saved as CSV and as a PNG with the measurements drawn on. For 3D models use the 3D Model Viewer.

On-device・No uploadDesktop recommendedWorks offline

Your files and input are processed only inside your browser on this device and are never uploaded to our servers.

Drop a file here

or

The PDF is not sent anywhere. Up to 50 MB.Accepts: PDFUp to 50 MB per filePaste (Ctrl+V) also works

How to use

  1. plan.pdf (1:100)

    Open a PDF drawing

  2. Distance, area, angle

    Calibrate the scale and measure

  3. measurements.csv
    measurements.png

    Save CSV and PNG

Open a PDF drawing, calibrate the scale, measure distance and area, then save CSV and PNG
  1. Choose or drop a PDF drawing, or press “Try a sample drawing with dimensions”.

  2. Set the scale. Use “Calibrate scale” to click two points whose real distance you know (such as the ends of a dimension line) and enter that length, or enter a scale 1:N (assuming the sheet is printed at true size).

  3. Pick Distance, Polyline length, Area or Angle and click on the drawing. Finish a polyline or an area with a double-click or “Finish”.

  4. Check the value, unit and page under “Measurements”, and choose mm, cm, m, inches or feet. You can delete any measurement.

  5. Use “Save as CSV” for the list and “Save PNG with measurements” for the current page.

What it does

Points are kept in PDF coordinates

Measured points are stored in PDF user-space coordinates (points; 1 pt = 25.4/72 mm), not screen pixels. Values do not change when you zoom, and page rotation and cropping are taken into account.

Three ways to set the scale

Calibrate with a line of known length, enter a scale of 1:N (assuming a true-size print), or use the PDF’s Measure dictionary (the ISO 32000 measurement information) when it has one. Each page has its own scale. The Measure dictionary is used only when it can be read, and as a starting value.

Distance, polyline, area, angle

Measures the distance between two points, a polyline’s length, a polygon’s area and perimeter, and the angle at three points. A polygon whose edges cross itself does not have a single area, so a warning is shown.

List, undo and export

Results are listed with type, value, unit, page and the source of the scale; undo and delete are available. The CSV includes the scale source, and the PNG draws the measurement lines and values on the drawing.

Works with the keyboard

Arrow keys move a crosshair, Space places a point and Enter finishes. The file is never sent anywhere.

Use cases

  • Estimate the area of a room or a site from a PDF floor plan for building work or a quote
  • Measure a length that has no dimension on the drawing, calibrated from a dimension line that does
  • Check that a drawing’s scale is right by comparing a dimension line’s number with your measurement
  • Pass measured lengths and areas to a spreadsheet as CSV
  • Paste a PNG with the measurements on it into meeting material

Supported formats

Input

PDF (vector drawings and scanned PDFs)

Output

CSVPNG (the current page with measurements)

Capability matrix

FeatureSupportNotes
Measure distance, polyline length, polygon area and perimeter, and anglesSupported—
Calibrate with a known length, enter a 1:N scale, switch units (mm, cm, m, in, ft)Supported—
List, undo and delete measurements; save CSV and PNGSupported—
Reading the scale from a PDF’s Measure dictionaryPartialOnly when it can be read: the first viewport with a rectilinear (RL) measure, in mm, cm, m, inches or feet. Treat the value as a starting point and confirm it by calibrating
Measuring a scanned PDFPartialIt works, but paper distortion and scanner scaling throw the scale off. One scale is used for both directions even if they differ
Snapping to line end pointsNot supportedNo snapping: a point is exactly where you click
Automatic recognition of the drawing’s contents, or automatic area calculationNot supportedYou click the points to measure
Opening password-protected PDFsNot supportedRemove the protection first
Measuring CAD files (DXF, DWG) or 3D modelsNot supportedPDF only

Limits & notes

  • PDFs up to 50 MB. Up to 500 measurements, and up to 500 points in one measurement.
  • Zoom is 10% to 800%. The image drawn on screen is capped at about 25 million pixels; beyond that the image gets coarser (point positions are still computed in PDF coordinates).
  • A scale of 1:N accepts a number from 1 to 1,000,000. It assumes the sheet is printed at true size and takes the PDF page size as the paper size.
  • Results assume the drawing was made to scale. Scanned PDFs have scale errors from paper distortion.
  • A point is where you click, so zooming in reduces the error. A long calibration line gives a smaller error.
  • Area is computed from the polygon’s corner coordinates (a polygon whose edges cross does not give the area of a single region).

Privacy & safety

Opening, drawing, measuring and exporting the PDF all happen in your browser. The PDF, its file name and the measurements are never sent to or stored on a server.

FAQ

How do I measure a distance on a PDF drawing?
Open the PDF and set the scale first (calibrating with a dimension line whose length you know is the most reliable). Then choose “Distance” and click two points; the length is shown in the unit you pick. A polyline’s length is measured the same way.
How do I calculate an area in a PDF?
Set the scale, choose “Area”, click the corners of the region in order and close it with a double-click or “Finish”. The area and perimeter are shown, in mm², cm², m², in² or ft². A shape whose edges cross has no single area, so check the order of the corners.
How should I set the scale?
Three ways: calibrate by clicking both ends of a line of known length and entering it, enter 1:N, or use the PDF’s Measure dictionary if it has one. 1:N assumes the sheet is printed at true size (no enlarging or reducing) and takes the PDF page size as the real size. When in doubt, calibrate.
Does it work on scanned drawings?
Yes, but paper distortion and scanner scaling throw the scale off, and some error remains in places even after calibrating with a dimension line. Treat the values as estimates.
Can I save the results?
Yes. “Save as CSV” writes a list with type, value, unit, perimeter, page and the source of the scale. “Save PNG with measurements” saves the current page with the measurement lines and values drawn on it.
Does it snap to line end points?
No. A point is exactly where you click. To hit an end point, zoom in before clicking. The arrow keys also move the crosshair in small steps.

Last updated: